shavespg

SPOKESHAVE BLADES

(For those of you who like to make your own)

click any image to see the larger version

There are now THREE sizes: Small, Standard and Extra Large With Cutting Edges 1 1/2", 2 3/4" and 4", Respectively. The Two Larger Cutters Have Been Hollow Ground Across Both the Top and Bottom of the Bezel (Similar to a Straight Razor or a Stanley #85).

All Blades Made From A2 Steel For Its Edge Holding, Toughness and Long Life

Here Are the Three:

Blades installed in

assorted home-made stocks

Yet Another View; The Back Bezel is Subtle and Difficult to Photograph and Display on the Web. Check the Larger Image to Get a Better Idea. The Second Bezel Makes for a Very Sharp Edge That You Will Find Very Easy to Re-Dress. The A2 Steel is Superior at Holding an Edge, even in wet oak and Should Last Through Years of Heavy Use.

Among those finding our blades useful:Windsor Chair Makers, Luthiers,

Bow Makers (Archery), Paddle and Canoe Makers, Cabinet Makers

Go HERE to See Me Work Some Knotty Stuff

Blades are designed to retrofit stocks made by Conover, Wachnicki, Gunterman,etc.
And of course also the KCWTW shaves

Note, the blades are available for sale in pairs and other combinations at a discount see HERE to order.

Some Shavings from the Blades

Making A Windsor Chair Seat